ECONOMICAL INTERIOR “NEOMATT” EMULSION PAINT

    At the bottom of this presentation, you will find the instructions and complete technical data of the product, according to label attached to the navigation menu.

Technical Data

Utilization

Generalities

Description

     The Economical Interior “Neomatt” Emulsion Paint is ahydro-soluble dispersion product based on Latex acrylic polymers, additives and fillers, for finishing the interior surfaces , with high degree of white, good adherence to the support and matted finish. This type of paint is completely opaque at only a few minutes after application and ensures a very good coverage, given a proper preparation of the support. Although very cheap, the product is effective and easy to use. The product has the possibilities of coloring limited to the basic shades of the NCS color card.

Main characteristics:

1. Great adherence to support;
2. Good lay on;
3. High degree of white;
4. Easy application and maintenance;
5. Matte aspect;
6. Limited washability;
7. Coloring in basic shades;
8. Environmentally safe character.
9. Reduces the support absorption.

Technical Data

Utilisation

Generalities

Utilization Domains

     The Economical Interior “Neomatt” Emulsion Paint is intended for protection and finishing the interior surfaces of civil and industrial buildings, new or old, walls and ceilings of different structures.

     This type of paint is not indicated for areas exposed directly to excess dirt, dust, fats or steam, or for areas with excessive moisture. It is recommended for areas with average circulation and exposure, both civil and industrial buildings.

     It is used as final layer for covering the following types of surfaces with mineral base: concrete, masonry, lime and cement plaster, lime or gypsum plasters and polishing plaster coats, new or old plaster based on binding material, gypsum board, absorbent mineral conglomerates of any type, old organic or mineral paintings, dry, compact and absorbent paintings.

     It can also be successfully used on other surfaces such as: OSB, MDF, PAL, ply, panel, linen, carton, asbestos cement, expanded polystyrene.

     For the application it is recommended to previously use “Emex” Pore Equalization and Filling Base Coat. Areas affected by mold or fungi will be cleaned in advance with  “Emex” Forte Sanitizer.

     Prior to applying paint, new surfaces will be prepared with “Emex” Wall primer, “Emex” Anti mold primer or the “Neomatt Eco” Economic Primer.

     To obtain maximum performance read carefully the Application Instructions and Technical Data Sheet, available in the menu below.

Tehnical Features

Technical Data

Utilization

Generalities